Brick Paver Installation & Edging



Staging of product

Most paver tasks will vary depending upon access, website conditions, project size and naturally, the weather. These scenarios can have a general impact on your job from a timing stand point. Careful factor to consider should be required to figure out the time to start the paver installation. Constantly try to decrease or avoid any traffic on the prepared locations.

The supervisor or job manager need to always have the products (sand/ pavers) distributed around the job website for efficient and easy setups. Paver pallets/bundles should be put in a way not to interfere with the paver installation. The correct pallet/bundle placement can make the actual job installation much easier and quicker by reducing the general labor of managing the product.

Brick paver patterns

Pavers can be placed in various patterns depending upon their shape. Each paver shape will generally have a number of various hatch patterns that are provided by the producer.

Professionals require to take into consideration the traffic weight loads on their paver jobs. In the majority of applications worldwide, it has been shown that pavers laid in a herringbone pattern have carried out adequately.

Pavers that are 60 mm (2 - 3/8 in) thickness appropriate for pedestrian applications. Pavers that are going to be utilized in industrial or business applications need to be 80 mm (3 - 1/8 in) in thickness.

Reference/starting point for brick paver installation

There are a number of conditions that identify the beginning point of a paver task.

When starting to install pavers it is best to snap a real straight chalk line on the surface of the bed linen sand or pull a real straight string line above the surface of the bedding sand at the ended up elevation of the pavers This will assist as a guide for maintaining straight joint lines and will likewise allow the installer to make adjustments in the alignment of the pavers.

Structures and concrete suppressing are usually not straight and should not be used for developing straight joint lines. Making use of string lines is essential to determine the true straightness of the edge also. As the paver installation progresses, the string lines will help lessen the requirement for little trim pieces.

Joint width between pavers ought to be in between 1/16 and 3/16 in (2 and 5 mm ). There are some pavers with spacer bars on their sides. These will keep a minimum joint width and allow the bedding and jointing sand to enter between each paver. Pavers with spacer bars are normally not laid in snug versus each other because a string line will offer constant joint spacing.

Installation of brick pavers.

One of the most extensively utilized approaches for the installation of pavers is hand installation of each paver. It is best to set up a single row of pavers along one of the real straight lines that you have actually pulled or above the bed linen sand. The finest approach is to put a paver versus another one and let it move down into the bedding sand.

When installing pavers on a steep grade, they ought to be installed at the base of the grade going uphill. This will prevent the pavers from creeping as they are being laid.

On large commercial and commercial applications, hand laying pavers would not be cost effective due to the labor strength. The very best method for setting up pavers on big jobs is to install them mechanically. Using a mechanical laying machine can set up around 6000 - 7000 sq ft a day. There are a couple products a professional must consider before installing pavers mechanically:

1.) Mechanical installers are only capable of installing pavers in certain patterns.

2.) The specialist needs to ensure that the producer is capable of manufacturing and bundling pavers in the wanted pattern on the pallets for simple mechanical installation.

Poor color mixing could result in a patchy looking installation. The majority of makers are constant with color blending on each bundle of pavers, however it is the professional's obligation to ensure proper mixing in the field.

Cutting treatments for brick pavers.

Professionals typically have 2 ways of cutting pavers. When cutting pavers damp, it will assist minimize Paver Installation Boca Raton dust and will lengthen the diamond blades life. The operator of the brick saw must always cut the pavers away from the surface area of the paver field when cutting wet, due to the reality that the pavers will develop a slurry that will stain the paver surface area.

The brick saw operator must always use the appropriate protection that is required for operating a saw, such as eye, ear, breathing and hand security ).

Edging types

Edge restraints play a significant function in the overall success of an interlocking pavement installation Edging restraints remove lateral movement of the pavers and hold the pavers securely together. Particularly at the outer border of the paver application, without an edging restraint, your project is ensured to fail over time.

Usually manufactured edge restraints are the most typically used by professionals. Manufactured edging restraints can vary from, plastic edging, steel and aluminum, timbers or precast concrete and stone.

Edging installation.

This could result in the migration of the bed linen sand and ultimate lateral movement of the pavers. If there is a possibility of losing bed linen sand in between the pavers and the edge restraint, then geo textile fabric is suggested. When a space between the pavers and the edging surpasses 3/8" (10mm), then the area ought to be filled with cut pavers.

Compaction of brick pavers.

After installation, the pavers have to be compressed. The entire area that is to be compressed should be swept clean of any foreign things and particles that can cause scuffing or scratching on the surface of the pavers.

It is important to have a compactor that can put in in between 3000lbs. And 5000 pounds. Of centrifugal compaction force. In addition, it is important that the first compaction happens before any jointing sand has been applied to the pavers. This can cause a bridging problem and will not permit the joints to be entirely filled with jointing sand if jointing sand is applied to the pavers before compaction takes location. This can likewise prevent the pavers from being correctly set into the bed linen sand.

When compacting the pavers, it is recommended that you make at least 2 passes in different instructions across the pavers. This will allow the pavers to be correctly embeded in the bedding sand and will force the bed linen sand up into the joints from the bottom of the pavers.

The compaction of the pavers is very crucial to the last efficiency of the pavers. Failure to do correct compaction can lead to deformations and pavement failure in time.


Paver pallets/bundles ought to be put in a way not to interfere with the paver installation. One of the most extensively used methods for the installation of pavers is hand installation of each paver. The operator of the brick saw ought to always cut the pavers away from the surface area of the paver field when cutting damp, due to the reality that the pavers will develop a slurry that will stain the paver surface area. Edging restraints eliminate lateral movement of the pavers and hold the pavers tightly together. When a gap between the pavers and the edging surpasses 3/8" (10mm), then the area must be filled with cut pavers.

Leave a Reply

Your email address will not be published. Required fields are marked *